Description
Foam Type: 2K System
Density:: 74.0 – 84.0 kg/m³
Chemical Family: Polyurethanes (PU)
Physical Form: Liquid
Foam Type: 2K System
Density:: 74.0 – 84.0 kg/m³
Chemical Family: Polyurethanes (PU)
Physical Form: Liquid
| Category | Details |
|---|---|
| Chemical Family | Polyurethanes (PU) |
| Foam Type | 2K System |
| RTU Product Type | Backfill Material |
| Technologies | Ready-to-Use Products |
| Product Families | Ready-to-Use Products — Foams |
| Physical Form | Liquid |
| Ready-to-Use Product Features |
|---|
| Chemical Resistant |
| Electrical Insulation Properties |
| Excellent Strength |
| Good Adhesion |
| Hydrophobic |
| Long Shelf Life |
| No Additional Backfilling |
| Reduced Labor Requirement |
| Reduced Premature Corrosion |
| Waterproofing |
| Description |
|---|
| Q-Set™ 250-750 significantly reduces labor requirements as no additional backfilling is required. |
| Eliminates time spent forming, pouring, and curing reinforced concrete. |
| Excellent adhesion to steel and galvanized steel posts. |
| Electrical insulator that reduces risk of premature corrosion caused by stray DC current in soil. |
| Hydrophobic; performance unaffected by wet soil or standing water (max 2” at bottom of hole). |
| Expands immediately after mixing, reaches ~50% strength in ~3 minutes, fully cured in ~2 hours. |
| Satellite dishes and attachments can be affixed within 15 minutes. |
| Category | Details |
|---|---|
| Markets | Electrical & Electronics |
| Applications | Electrical & Electronics — Wire & Cable Optical Fiber & Telecom |
| Application Area | Satellite Dish Post & Hole |
| Compatible Substrates | Galvanized Steel, Metal, Steel |
| Parameter | Details |
|---|---|
| Application Temperature Range | -40°F to 86°F (-40°C to 30°C) |
| Conditioning Requirement | Kit must be conditioned to 50°F–90°F (10°C–32°C) for at least 1 hour prior to use |
| Situation | Instructions |
|---|---|
| While Wet | Remove smudges using a soft cloth and mineral spirits |
| After Curing | Can only be removed by carefully cutting with a sharp knife |
| Skin Contact (Wet) | Wipe away and wash immediately |
| Skin Contact (Cured) | Apply hand lotion multiple times daily; peels off in 2–3 days |
| Hair/Beard Contact | Coat with conditioner for 10 minutes, then comb and wash out |
| Property | Value | Units | Test Method / Conditions |
|---|---|---|---|
| Gel Time (25°C) | 3 – 4 | minutes | ASTM D2471 |
| Curing Time (25°C, full) | 2 | hours | — |
| Tack-Free Time (25°C) | 8 – 10 | minutes | — |
| Pre-Bonding Time (25°C) | 90 – 120 | seconds | ASTM D2237 |
| Property | Value | Units | Test Method / Conditions |
|---|---|---|---|
| Application Temperature | -40 to 30 | °C | — |
| Diesel Fuel Resistance | Excellent | — | — |
| Salt Water Resistance | Excellent | — | — |
| Water Resistance | Excellent | — | — |
| Ammonium Hydroxide (10%) | Good | — | — |
| Gasoline Resistance | Good | — | — |
| Sodium Hydroxide (Concentrated) | Good | — | — |
| Property | Value | Units | Test Method |
|---|---|---|---|
| Compressive Strength (25°C) | min. 85 | psi | ASTM D1621 |
| Moisture Content (25°C) | 0.02 | % | ASTM D2842 |
| Flexural Strength (25°C) | 100 | psi | ASTM D790 |
| Modulus of Elasticity (25°C) | 20,000 | psi | ASTM D1621 |
| Density (25°C) | 74 – 84 | kg/m³ | ASTM D1622 |
| Peel Strength (25°C) | min. 20 | pli | — |
| Closed Cell Content | min. 90 | % | ASTM D2856 |
| Chemical | Resistance |
|---|---|
| Water | Excellent |
| Salt Water | Excellent |
| Sulphuric Acid (20%) | Excellent |
| Diesel Fuel | Excellent |
| Hydrochloric Acid (20%) | Excellent |
| Gasoline | Good |
| Ammonium Hydroxide (10%) | Good |
| Sodium Hydroxide (Concentrated) | Good |
| Category | Details |
|---|---|
| Packaging Type | Bags |
| Packaging Size | 21.07 fl oz (623 mL) |
| Coverage | Fills a 3–4” diameter hole, 3’ deep, with a 2–2.6” metal post |
| Regional Availability | Asia Pacific, Europe, India/Middle East/Africa (IMEA), Latin America, North America |
| Parameter | Details |
|---|---|
| Shelf Life | 1 year (at 25°C) |
| Storage Conditions | Store in a dry, room-temperature environment |
| Note | Users must test to determine required support time for their application |
No resources available for this product.
No reviews yet.
Foam Type: 2K System
Density:: 74.0 – 84.0 kg/m³
Chemical Family: Polyurethanes (PU)
Physical Form: Liquid
| Category | Details |
|---|---|
| Chemical Family | Polyurethanes (PU) |
| Foam Type | 2K System |
| RTU Product Type | Backfill Material |
| Technologies | Ready-to-Use Products |
| Product Families | Ready-to-Use Products — Foams |
| Physical Form | Liquid |
| Ready-to-Use Product Features |
|---|
| Chemical Resistant |
| Electrical Insulation Properties |
| Excellent Strength |
| Good Adhesion |
| Hydrophobic |
| Long Shelf Life |
| No Additional Backfilling |
| Reduced Labor Requirement |
| Reduced Premature Corrosion |
| Waterproofing |
| Description |
|---|
| Q-Set™ 250-750 significantly reduces labor requirements as no additional backfilling is required. |
| Eliminates time spent forming, pouring, and curing reinforced concrete. |
| Excellent adhesion to steel and galvanized steel posts. |
| Electrical insulator that reduces risk of premature corrosion caused by stray DC current in soil. |
| Hydrophobic; performance unaffected by wet soil or standing water (max 2” at bottom of hole). |
| Expands immediately after mixing, reaches ~50% strength in ~3 minutes, fully cured in ~2 hours. |
| Satellite dishes and attachments can be affixed within 15 minutes. |
| Category | Details |
|---|---|
| Markets | Electrical & Electronics |
| Applications | Electrical & Electronics — Wire & Cable Optical Fiber & Telecom |
| Application Area | Satellite Dish Post & Hole |
| Compatible Substrates | Galvanized Steel, Metal, Steel |
| Parameter | Details |
|---|---|
| Application Temperature Range | -40°F to 86°F (-40°C to 30°C) |
| Conditioning Requirement | Kit must be conditioned to 50°F–90°F (10°C–32°C) for at least 1 hour prior to use |
| Situation | Instructions |
|---|---|
| While Wet | Remove smudges using a soft cloth and mineral spirits |
| After Curing | Can only be removed by carefully cutting with a sharp knife |
| Skin Contact (Wet) | Wipe away and wash immediately |
| Skin Contact (Cured) | Apply hand lotion multiple times daily; peels off in 2–3 days |
| Hair/Beard Contact | Coat with conditioner for 10 minutes, then comb and wash out |
| Property | Value | Units | Test Method / Conditions |
|---|---|---|---|
| Gel Time (25°C) | 3 – 4 | minutes | ASTM D2471 |
| Curing Time (25°C, full) | 2 | hours | — |
| Tack-Free Time (25°C) | 8 – 10 | minutes | — |
| Pre-Bonding Time (25°C) | 90 – 120 | seconds | ASTM D2237 |
| Property | Value | Units | Test Method / Conditions |
|---|---|---|---|
| Application Temperature | -40 to 30 | °C | — |
| Diesel Fuel Resistance | Excellent | — | — |
| Salt Water Resistance | Excellent | — | — |
| Water Resistance | Excellent | — | — |
| Ammonium Hydroxide (10%) | Good | — | — |
| Gasoline Resistance | Good | — | — |
| Sodium Hydroxide (Concentrated) | Good | — | — |
| Property | Value | Units | Test Method |
|---|---|---|---|
| Compressive Strength (25°C) | min. 85 | psi | ASTM D1621 |
| Moisture Content (25°C) | 0.02 | % | ASTM D2842 |
| Flexural Strength (25°C) | 100 | psi | ASTM D790 |
| Modulus of Elasticity (25°C) | 20,000 | psi | ASTM D1621 |
| Density (25°C) | 74 – 84 | kg/m³ | ASTM D1622 |
| Peel Strength (25°C) | min. 20 | pli | — |
| Closed Cell Content | min. 90 | % | ASTM D2856 |
| Chemical | Resistance |
|---|---|
| Water | Excellent |
| Salt Water | Excellent |
| Sulphuric Acid (20%) | Excellent |
| Diesel Fuel | Excellent |
| Hydrochloric Acid (20%) | Excellent |
| Gasoline | Good |
| Ammonium Hydroxide (10%) | Good |
| Sodium Hydroxide (Concentrated) | Good |
| Category | Details |
|---|---|
| Packaging Type | Bags |
| Packaging Size | 21.07 fl oz (623 mL) |
| Coverage | Fills a 3–4” diameter hole, 3’ deep, with a 2–2.6” metal post |
| Regional Availability | Asia Pacific, Europe, India/Middle East/Africa (IMEA), Latin America, North America |
| Parameter | Details |
|---|---|
| Shelf Life | 1 year (at 25°C) |
| Storage Conditions | Store in a dry, room-temperature environment |
| Note | Users must test to determine required support time for their application |
No resources available for this product.
No reviews yet.

You may check out all the available products and buy some in the shop
Return to shop
DOT Canada Shipping Policy
At DOT Canada, we aim to make your shopping experience simple and hassle-free. Below are the details of our shipping policy.
Free Shipping
We offer free standard ground shipping on all orders of $500 or more (before taxes) in a single purchase.
This offer applies to orders shipped within Canada only.
Orders below $500 are subject to a flat-rate shipping fee, calculated at checkout.
Processing & Delivery
Most in-stock items ship within 1–2 business days after your order is processed.
Backorder items are shipped as soon as they become available.
Special order items are ordered directly from the supplier and may have a longer lead time depending on availability.
Delivery times vary depending on your location and courier availability.
Tracking information will be provided once your order has shipped.
Exclusions
Free shipping does not apply to bulk or oversized items, freight shipments, or special-order products.
Additional charges may apply for heavy, oversized, or remote-area deliveries.
DOT Canada reserves the right to adjust shipping rates or exclusions at any time.
Geographic Limitations
At this time, we only ship within Canada.
We do not accept or fulfill orders outside of Canada.
Return Policy
At DOT Canada, we want you to be confident in your purchase. If for any reason you are not fully satisfied, please review our return guidelines below.
Eligibility for Returns
Items may be returned within 30 days of delivery.
Unfortunately, we cannot accommodate returns after 30 days from the date of purchase unless otherwise noted by your sales representative.
Products must be unused, in original condition, and in original packaging with all accessories, manuals, and documentation included.
Proof of purchase (order confirmation or receipt) is required.
Non-Returnable Items
Clearance products and final sale items are not eligible for return.
Special-ordered items are subject to the vendor’s return policy. Some may have a restocking fee, and some may be non-returnable.
Contact your sales representative for vendor return authorization on special-ordered items.
Returns of special-ordered items are not available online.
Installed or used items (such as cable spools, tools, or electronic components that show wear) cannot be returned.
Software, digital downloads, and consumables (e.g., batteries) are non-returnable.
How to Make a Return
We offer two convenient ways to make a return:
Visit a local store – Bring your item(s) with proof of purchase to your nearest DOT Canada location.
Ship items back at your own expense – Contact our support team for a Return Authorization (RA) number, repackage the item(s) securely, and ship them to the return address provided.
Customers are responsible for return shipping costs unless the item is defective or shipped in error.
Return Types
When initiating a return, you will be asked to specify the reason:
Credit – New: Unopened, unused products in original packaging.
Credit – Defective: Products that do not function properly upon arrival.
Exchange – Defective: Replacement of defective items at no charge.
Repair: Items returned for manufacturer repair. Terms and fees are subject to the vendor’s warranty policy; handling charges may apply.
Refunds & Credits
Refunds or credits are issued once returned items have been received and inspected.
Approved refunds will be processed to your original method of payment within 5–10 business days.
Shipping charges are non-refundable, except in cases of defective products or errors on our part.
If the manufacturer determines that a product is not defective, not new, or has been damaged due to misuse or abuse, the customer will be responsible for all related replacement or repair costs.
Damaged or Defective Items
If your order arrives damaged or defective, please notify us within 7 days of delivery.
Items that are defective out of the box will be exchanged for a new product at no charge or returned for credit, subject to the manufacturer’s policy.
DOT Canada reserves the right to follow manufacturer guidelines for final approval on defective claims.
Give us a shout if you have any other questions and/or concerns.
Email: info@dot-canada.ca
Phone: +1 (833)510-4446